If you are from the EU, please visit my payhip shop to purchase patterns: https://payhip.com/Louorthdesigns

Why you need a Tailor's clapper

The links in this blog post are affiliate links. If you click an affiliate link and make a purchase I receive a small commission.

Hello, so today I am here to tell you all about the tailor’s clapper. I’m going to be talking about what it is, how to use it (and why you need one.)

Tailor's clapper for patchwork

Let’s jump straight in, first up, what is a tailor’s clapper?

A tailor’s clapper is essentially a rectangular block of wood that you lay on top of a seam after pressing to get a crisp and flat seam. So, if you like to have flat seams when you sew (I know I do) then this humble tool can help you!

They are made from hardwood, (such as Cherry, Maple and Walnut) as they need to be heavy and close grained to work their magic.

Here's mine:

 
walnut tailor's clapper

How does it work?

The wood absorbs the steam and holds the heat into the seam as it cools, leaving the seam flatter and neater.

The tailor’s clapper is probably going to be one of the most low tech tools in your kit. To use it, first press your seam as you normally would, using a steam or by misting the seam with some water beforehand. Then as you take the iron off, lay the clapper down immediately on top of the seam and leave for 5- 10 seconds or until cool. You don’t need to press on it or do anything fancy.

You can also use it to help flatten out creases in the fabric.

Here is a sample I've made up for you. The front is using the clapper and the back is simply pressed.

seams before and after using a tailor's clapper

 

This is great for quilters, as flat seams lead to neater blocks and also make the job easier when it comes to basting and quilting. I love anything that makes basting easier.

It is also good for garment making and also other accessories sewing, a flat seam will make a top stitch neater and easier to sew.

It's easier to see the difference with a couple of extra seams. The one at the front has been pressed and at the back a tailor's clapper has also been used. 

PAtchwork block using a tailor's clapper

 

Okay, I think I need one, what do I look for?

Here’s a few things to consider when buying your clapper:

Size. They can come in a range of sizes. Think about you needs and what size would suit you best. The one I have is 12” long as I was happy that that size would cover most seams in most blocks.

Wood type. Make sure the wood is a close grain hard wood like Cherry, Maple, Walnut etc.

Finish. They shouldn’t have any varnish or oils on them, just smoothed out wood. Not only could an oil or varnish transfer to the fabric but it could also stop the wood doing its job properly.

 

The one I have (as seen in the pics) is a handmade walnut clapper that I found on Etsy

Check out your local quilt/sewing shop and see if they stock one or check out the many different handmade versions on Etsy.

 

I hope you enjoyed finding out a little more about the tailor's clapper.

Do you have one, what do you think?

Lou

____________________

 

Leave a comment

Please note, comments must be approved before they are published